Designed to produce "holographic" and sparkling effects | Temperature: 150° C, Time: 10 sec., Pressure: medium, (#4-6 on Hotronix®), Peel: cold | Recommended fabrics: 100% cotton, 100% polyester (Test before application), Polyester-cotton blends | Multi-Colour-Designs: is not recommended for multi-layer applications | You should always test cut prior to any production run, cutter settings will need to be adjusted as the blade ages | For optimal cutting and weeding, maintain a line thickness of at least 1.5 mm (1/16") for lettering and logos | Machine wash up to 40° C using mild detergent | Do not use bleach | Dry at normal dryer settings on household machines | Do not dry-clean | Do not iron directly onto CAD-CUT® Effect (use cover sheet) | Store in cool, dry area; avoid direct heat, sunlight and humidity | Every 60 cm there is an approx. 0,5 mm wide horizontal strip in the surface of the film for production reasons