Technical Data: Transfer Film: Polyurethane, cast / Adhesive: Polyurethane-hotmelt / Thickness [mm]: 0,075 +/- 5 % / Liner: PET-film, non adhesive | Transfer Conditions: Temperature: 160 °C / Pressure: 2,5 - 3,0 bar [medium pressure] / Time: 15 sec. | Wash resistance: 60 °C / Only colour or mild detergent. Wash textiles inside out. Tumble dryable | Printing: On reverse, mirror-inverted | Heat-sealable, printable Polyurethane-film (transparent) suitable for white textiles | POLI-FLEX® 4655 is a two-layer transfer film being coated with a hotmelt on the non-covered printable side. The upper side of the film after the application process is based on a transparent, UV-resistant polyurethane | POLI-FLEX® 4655 is compatible with all current printers using ECO-solvent and SOLVENT inks. The PET liner allows even filigree motifs to cut by all current CAD/CAM plotters after printing. After weeding the heat transfer is done with the original carrier | A matt PET-film on top of the image during the thermal transfer gives a brilliant semi-matt finish. After heat-transfer we recommend removing the PET-liner after a short period of cooling down to room temperature | The transfer film is used for motifs and logos on sport, leisure and work wear | Nylon and textiles with a hydrophobic impregnation are not suitable for heat transfer.