Technical data: Transfer film: cast polyurethane/Adhesive: polyurethane hot-melt glue/Thickness in [mm]: 0.095 +/- 5%/Lining: non-adhesive PET film | Transfer conditions: Pressure: 2.5–3.0 bar [average pressure] | Temperature, time: 130°C, 5 sec./150°C, 4 sec./160°C, 3 sec.; nylon pressure: 2.0 bar [low pressure]/ | Temperature, time: Pre-press at 150°C for 5 seconds./Press onto nylon for 5 seconds./Remove PET lining, cover transfer with silicone paper, press for another 10 seconds./The pressing time should be adjusted for cotton and mixed fabrics with a particularly heavy structure | POLI-FLEX® TURBO 4901-1/4902-1 is a new polyurethane transfer film with a hot-melt adhesive, which can be transferred quickly at low temperatures to avoid damaging the material | POLI-FLEX® TURBO 4901-1/4902-1 is suitable for transfers on textiles such as cotton, polyester, non-waterproof nylon and polyester/cotton or polyester/acrylic blends. Waterproof nylon fabrics should be tested for suitability before carrying out transfers. POLI-FLEX® TURBO 4901-1/4902-1 can be used for printing designs on t-shirts, jerseys, sports and leisure wear, sports bags and merchandise | POLI-FLEX® TURBO 4901-1/4902-1 can be cut using any standard plotter. We recommend using a standard blade (45°). Once it has been weeded, the cut flex film is transferred using a transfer press. The PET liner should be removed while it is still slightly warm | The soft, rubber-elastic transfer film ensures that textiles have a pleasant feel and are comfortable to wear. POLI-FLEX® TURBO 4901-1/4902-1 has excellent opacity | The raw materials used are not harmful to the environment and are free from PVC, plasticisers and heavy metals. If the specified temperature and pressure requirements are not met during the heat transfer printing process, secure and permanent adhesion of the flex film cannot be guaranteed.